This is the passenger side front frame rail. I used 1/8" thick by 4" wide plate for this section. This operation is fairly simple. The 4" plate is larger than the frame rail, so I used a marker to draw a line with the plate against the frame rail. I used my plasma cutter to shape the steel. A slight amount of grinding on my belt sander smoothed out the edges. I also welded some small cracks on the frame rail and filled the unused holes. I think I'm finally ready for that front bumper.Tuesday, July 20, 2010
This is the passenger side front frame rail. I used 1/8" thick by 4" wide plate for this section. This operation is fairly simple. The 4" plate is larger than the frame rail, so I used a marker to draw a line with the plate against the frame rail. I used my plasma cutter to shape the steel. A slight amount of grinding on my belt sander smoothed out the edges. I also welded some small cracks on the frame rail and filled the unused holes. I think I'm finally ready for that front bumper.
Subscribe to:
Post Comments (Atom)
This week I will be posting the progress I made on the front bumper
ReplyDelete